The Doors

As spring is coming on and the Home Renovation Tax Credit ended with January 2010 I have several projects lined up that I am planning to tackle. I finally have the spare room door replaced, it was not is any great shape as you can see. When I moved in this little hole was on the livingroom side of the door. The day I arrived we had to go out and buy some supplies and get lunch so I shut the dogs in the spare room for a couple hours. They made short work of a small hole on the other side of the door.

So I bought a new door and My Amazing Dad came over to install it. He cut the handle hole, chipped out the hinge spaces and we hung it quite easily. More easily than I'd have thought actually. It really is amazing what a difference something new and fresh can make. I think the total replacement cost for this door was about $60. But ... you can't beat the bargain basement price of this next renovation. I discovered partway through December that when I was sitting in the livingroom I could feel a draft. I thought it was coming from under the spare door, that room isn't heated, so I put a draft stopper along the bottom. Still a draft. Thought it was the front door, another draft stopper. Still a draft. The draft was coming from the entrance to the livingroom. I hung a sheet and voila ... no more draft. Well, a sheet isn't very nice and an annoying PIA so I decided that a French door would do the trick. I figured I could shut the dogs behind it if necessary and to stop the cats annoying the crap out of me I'd take out a pane of glass so they could go back and forth without demanding I open the door.

I went French door shopping knowing they cost about $100. I knew I wanted a simple finger-jointed pine door, unpainted and pretty standard. I was perusing the door aisle of our local DIY and came across their 'no returns' section. Always with an eye tuned to a bargain I started looking through the doors. What's this? A 32" finger-jointed pine French door with a DAMAGED - NO RETURN sticker on the side. Well, what is wrong with it? It had one single broken pane. It was $20. I bought it on the spot. I explained to the HI employee that the broken pane was perfect as I intended to remove one anyway from whatever door I bought. He then expressed his concern about removing the pane, "I wonder the best way to get that pane out?" Uh. Break it?

I discovered upon getting the door home that the pane of glass that was broken is actually the second from the top, not the bottom, so I ended up hanging it upside down. I think, unless you actually knew it was upside down, you'd never know. My Amazing Dad, with his circular saw that is literally older than I am (but with a new blade so it still cuts marvelously), cut off some of the bottom/top of the door because it exactly fit the space it needed to be put into and all doors need room to swing.

Last week My Amazing Dad and I spent the day hanging this door - actually My Amazing Dad hung the door, I watched and held various tools and made lunch. It is quite a process. You never realize how important 'square' is until you try to hang a door. The entry to the livingroom was 36" and the door was 32" so we had to make up the space with 1x4 pieces of wood. Here is a terrible photo of the door partially painted and the wood(kinda) inbetween the original frame and the new frame. The handle hole was an absolute bitch when we tried to put the handle in it but we finally manhandled the thing so it would work properly. It does now thank doG. I also moved the desk from the kitchen, where it was increasingly annoying me, into the livingroom where, conveniently I can now surf online and watch TV ... the stuff of dreams. You can see the internet cable strung up and over the door. And now you can't. I painted the cable the same color as the walls and I think it blends beautifully. This is obviously the livingroom side. When this door is shut it takes about 10 minutes for the room to warm comfortably and stay warm. And this is the kitchen side of the door, the bathroom is off to the right and my bedroom is off to the left. The hardwood still needs refinishing but that will wait until warmer weather and I can open all the windows.

But wait! What about that pane of glass that was to be removed? Why ... I did remove it. I had to shove the cats through a few times each to show them where the hole was located and only Ceilidh jumped into the wrong pane once - she leaped into the middle pane, slid down, shook her head, looked to her left at the correct hole and hopped through. Here is Archer demonstrating which pane is missing. Raimi's head does fit but he doesn't like putting his head through and Leeloo refuses to lower herself to such monkeyshines.
In all, this door cost about $90 total including the hardware, casing and paint - a pretty good solution to a cold winter draft! I also expect in the summer, with the monster fan going, that the room will cool down quite nicely too ... can't wait to test it!

Floored

Over Christmas I took a break from renovations so that during the holidays I wasn't dealing with paint and dust and clean up. Now that we are well past the festive season I have no excuse to not work on various outstanding reno projects. This year will see the floors finished, the ceilings painted, screens replaced, the spare door replaced, a french door installed, and I will start replacing the fence with preserved boards.




My first project of the new year was the lino for the laundry floor. With the layers and layers of plywood and vinyl pulled up it was simply a matter of smashing the nails in a bit more, levelling the dips and holes with a patching agent and laying down the flooring. I had a day in mind to do the whole thing in one go, went to pick up my supplies and discovered they were out of flooring adhesive. So I bought what I could but didn't get the lino as I didn't want to be stepping over it for the week it would take to get the adhesive in.



Once the adhesive arrived I went to pick up the lino. I decided that since the space I needed to fill was 8x11 feet and the end rolls sold pre-wrapped were 8x12, what better solution than to just choose one of those? So I get the roll home and it sits for a couple days before I have time to get it laid out. While still in it's wrap I slid it into the laundry area by the back door. Huh. That's odd, did I mis-measure? It's 2 inches too short. Nope, *my* measurements are correct, the lino, however, is too short. So the day I was going to spend doing the lino turns into yet another day of not.

I take it back and have the guy measure the other rolls to see if any are actually 8 feet as it says on the package. Nope. None of them. So there is a sale on, thank gawd, of a lino I like and I say, gimme 8 feet of that(they are 12 feet wide). It gets rolled, jammed into my truck and off we go.

I prepared the area by vacuuming as much dog hair, cat hair, dust, and whatnot as I could. Around the back door I ran into a little problem. Obviously the back door has been leaking at the bottom and soaking into the plywood, this caused it to rot a bit. I used a screwdriver to scrape up as much of the wet wood as I could and lo and behold, now there are holes down into the crawl space through the floor. Fabulous. I vacuumed up the excess wood bits and left it overnight to dry out. Now I need to go back to the hardware store and get some spray foam insulation to fill the holes.

I mixed a little of the plasti-patch and get started. It was a relatively easy process to fill all the little nail holes, screw holes, and level up some less than exact plywood. While it was drying I headed to Home Hardware to pick up the spray foam, stuffed the holes full of that miracle substance and then did another layer of Plasti-patch. There was a section where the difference in height was about a quarter inch so I had to smooth that into a little ramp so the lino wouldn't get ruined in that spot. Once all that was dry I swept again and the real ordeal began. I forgot to ask, and still don't know, whether a person is supposed to cut the lino to fit before or after you glue it down. I cut it before. I am thinking now that was a mistake but ... I digress. I had the lino rolled up at one end of the floor and the lino adhesive out with a trowel ready for action. I smeared a bunch of glue down and fought with the lino to get it into the space I needed it, namely the corner under the window. Alone, this was not easy. I then accidentally dropped the loaded trowel onto the floor where I didn't want adhesive so that while I was fighting with the roll, half unrolled into one corner, it was sliding across and sticking to the adhesive where I'd dropped the trowel.

Then I dropped the trowel handle-first into the adhesive. Take a moment to imagine how that went.

I then stuck the other corner down and realized, too late, that is was not lining up properly, it was curled at the corner a bit which meant the whole roll was about a quarter inch crooked. Since it was taking so long to get the roll down the first corner was mostly dried and there was no moving it. I just sat for a moment and despaired, then carried on with a shrug and WTH.

I spent the next 45 minutes spackling down adhesive, unsticking my hand from the trowel, unrolling the lino, spackling down more adhesive, unsticking my hand from the trowel, and unrolling the lino. At about the three-quarters-done mark I dropped the trowel handle-first into the adhesive a second time. I was almost beyond sanity.

Eventually, I won the battle and managed to get the whole sheet stuck down to the floor. I put cans of paint along a couple edges to get them to lay flat to dry, gave the whole ordeal a sticky finger and went to bed.

The next morning things looked a lot better. Although I intend to refinish the kitchen floor I put down the threshold so that the edges of the lino don't curl up and get ruined.

I also put in the threshold, at last, across the dining door. The next project to finish off the laundry area and back door is to put in the baseboard. That will mean the entire area is relatively complete. I put a piece of plywood under the expen because I don't want it to mark up the flooring - especially after what I when through to install it. I hope one day to build an actual laundry room, which there clearly used to be, but for now this will have to do. The dogs give it their stamp of approval anyway.

It Was the Month Before Christmas ...

I fought the Christmas lights earlier this week and won. It was a close call though. This is my cute little blue house with my cute blue decorations. I'm so proud. The lights around the door are lit but they didn't show up very well. That lattice on the ground in the garden is to stop the neighbour's cat from using it as a toilet. I won't go into detail what will happen to the cat if I catch it but it won't handled with much Christmas spirit. I hope Santa ignores the 'Caution: Ridgebacks' sign. Now my Christmas tree is up, the dog and cat stockings are hung by my electric fireplace and the house is ready for Santa. That's my new 4 foot pre-lit tree, it's on a box and I expect it to hit the floor at least once this holiday. This coming week I'll be taking photos of the dogs in their Christmas torture devices! Can't wait!

No Wonder They Call It Hard

As suspected underneath layers and layers of old flooring was hardwood. The entire floor of the original house looks to have been hardwood that was installed even before the walls went up. First removal, of course, was the hack job installed laminate. The laminate was easy to remove and present no problem except being grossed out by the amount of dirt underneath it. Remember the layer photo? So there is hardwood, plywood, two layers of lino, a laminate cushion and then laminate. While the laminate was easy to remove the lino ... not so much. Ignorance is bliss as I did not know what was coming. The two layers of lino for the most part peeled up quite easily, it was a sheet of lino with tiles stuck to it, but handling it was a huge pain in the ass since it's awkward and heavy. I stopped at the laundry area because I was reasonably sure that is where the hardwood ended and I just wanted to expose the hardwood. I suspected there was just plywood under the laundry floor. The lino, once up, exposed the plywood. The plywood, I didn't realize, was secured to the hardwood by screws. Hundreds of screws. My Dad came to help and show me how each piece of plywood was secured to the floor by screws set in every 8 inches or so in a grid pattern. Over a 4 x 8 sheet of plywood ... that's a lot of screws. And not only that, each screw was hidden by a levelling compound to prevent the lino on it from showing the screw over time. What color was the compound? Why, the same color as the plywood of course. We had to find, dig out each screw and then remove it. Fortunately the first sheet was small and came up pretty easily. Ta da! Hardwood. Dirty, covered in paint splatter, screw holes and drywall dust but there it is. It had some sort of coating on it and when I washed it I realized it was ...newspaper. I couldn't read any dates but using newspaper as a sound insulator or just insulation hasn't been in practice in quite a few decades. This hardwood hasn't seen light probably since before I was born ... 29 years ago(cough). You could only see the newsprint when it was wet like so ... So, buoyed by the success of the first sheet I set to the second one on my own and managed it fairly well without too much trouble. I discovered that there must have been a leak under the sink at some point because the hardwood behind the stove is in pretty bad shape. I don't think it's unsalvagable but it will need considerable sanding and filling to fix. I don't mind too much since it's under the stove and once it's sanded it should come out okay. It looks worse than it is really. That's Ceilidh - she's my helper. After this sheet I ran into a problem. The other two sheets were under the laminate running into the laundry. I either needed to rip up all the laundry laminate as well or cut along the plywood to remove it. The W/D and the hot water tank are difficult to remove so I opted to leave them where they were for now and just remove the rest of the laminate. My Dad cut along in front of them and I removed the laminate in the laundry area. Problem. Once the laminate and lino were removed I spent some time on my own trying to remove the plywood. Thus ... I killed my drill. Or thought I had. Dad to the rescue. Again. He came over one day and we spent several hours cutting, swearing, sweating, drilling, undrilling and finally just forcing some of that plywood up. Apparently the first two sheets of easily removed plywood were put there to lull me into a false sense of security of 'this will be eeeaaasy'. Ya right. It was a dirty frustrating job and I don't recommend it. Turns out I didn't kill my drill - I just don't know how to use it properly - there it is sitting on the floor.

So here is the kitchen. Finally. My Dad spent ages trying to get the plywood cut from underneath the cabinets. It was brutal. The plywood goes all the way under the cabinets so he had to cut along the kick plate to get it out. Once that was completed we had all hardwood in the kitchen. It doesn't look so hot now but once I sand off the years off neglect it will look pretty sharp. The laundry did end up being plywood so I will carry on the barnboard lino strips from the dining room into the laundry. Right now it's a hodge podge of plywood and laminate pieces to keep out drafts and bugs. There are holes drilled into the plywood right in the middle of the laundry and they lead directly to the crawl space under the house. We suspect there used to be a wall leading across from the left side of the the kitchen to about where that single piece of laminate is screwed down and then to the back wall. This is something I think I want to reinstall at some point to make an enclosed laundry room.

And so ... we are halfway done the floors. I have to sand, fill, sand again, lacquer and also put in the balance of the lino in the laundry. Should be a good long winter project ... anything to avoid painting the ceilings.

Bath Bomb

The bathroom, is 99% complete. I have a new shower curtain planned but that won't be for a little while yet. The main thing that's been bugging me is the vanity. It was clearly a cheap option and while cute was not intended for a main bathroom, probably a half bath under some stairs or something. As a reminder here is the bathroom when I first saw it.

And here is the bathroom now. Repainted, new baseboards, over the toilet cabinet, window insulated, casing installed, new mirror and a new vanity. In all I the bathroom reno cost about $300 which I think is pretty good. Big thanks to my Dad and his endless patience with the vanity! I am so proud of the way it looks now ... the previous useless owners wouldn't recognise it. Probably because it displays a modicum of taste.

Get a Handle On It

What's worse than having a door handle that you can't open from the inside? A door handle you can't open from the outside. It's truly distressing when you are outside in your backyard preparing to mow the lawn and you realize that not only are you and four dogs locked in your backyard, but that the front door is also locked and you have no way to get into your house.

It's about this time that you curse the people who made the POS door handle you've been struggling with since you moved in. It's also about the time you remember that you removed the screen from the dining window and that the window itself is not locked. So you climb through the window, struggle with the back door handle and then realize it now won't open from the inside.

So you get a screw driver, thinking you're clever as shit, and take off the interior handle, pop the exterior handle off and now what? Now you have a peice of metal that runs through your door and into a hole in the frame that you can't do sweet eff all with. The dogs are on the outside thinking 'We're thirsty' and you're on the inside thinking 'Very. Bad. Words.' So you decide today is the day you will go and get the matching handle to the front door which has never given you a stitch of trouble in the 3 weeks you've owned it.

So, have a shower(because you're all sweaty from the lawn mowing), get dressed, load dogs in truck, buy handle, take dogs for walk in the rain, get home and stare angrily at the still sealed door. Think more bad words, suppress the rage and pry that sucker out of there doing as little damage to the door and frame as possible. Voila, one open door.

So now the handle is installed and guess what? It works ... beautifully. There is something to be said for a door handle that will let you in your own house.

Dining Out

I am a naughty renovator. Well, blog updating renovator anyway. I have completed so many tasks now I don't know where to begin. How about the dining room which has taken on the most dramatic change in recent weeks.

The dining room was rough, ugly carpet (gak) over lino on plywood. All four (yes ... 4) plugs in the room had been painted over multilple times so you couldn't really plug anything into the holes anymore, and the walls were a vibrant shade of lime green. Gag me. It was used as a bedroom in any case although I'm not sure how anyone could possibly have slept in there with that color. Must have been a teenager.

I removed the door, the carpet, the lino and the light and got to work. Since I wanted to compliment the several pieces of black and white artwork I possess I decided to paint the room a shade of grey with a soft lilac/purple hue so the room wouldn't be so cold. I then installed strips of vinyl flooring called barnboard which picks up the shade of the walls. All that is left, as with the rest of the house, is the ceiling.

So ... come on by if you're in the area and I can burn you some dinner.